Velcro License Plate Holder | Frameless
🥇 Very popular in Switzerland!
💚 55'000+ Happy Customers
🔥 1'900+ Verified 5-star reviews
From CHF 50.-. Order by 1 PM, get it next day.
Product defective? We'll replace it for you free of charge.
Tax included. Shipping calculated at checkout
It couldn't be easier.
✔ 1 set = 1 vehicle (front + rear)
✔ Plug & Play
✔ incl. accessories
✔ Car wash, UV and weather resistant
✔ Firm hold even after 1000 changes
Universal Velcro license plate holder from 21CARS® offers you an aesthetic solution for all your vehicles without a license plate holder frame .
Our self-adhesive, high-performance Velcro tape can be installed in no time at all . One set contains everything you need for a vehicle. Thanks to our ultra-thin Velcro, hardly anything is visible. The 21CARS® Velcro holders ensure an extremely cool, clean look and offer secure and flat- fitting car numbers - with no protruding edges! The product is designed for all weather conditions and can withstand speeds of over 300 km/h. Whether as a beautiful accessory or for daily, super-fast changes from one vehicle to another without compromise .
Quality is important to us, which is why we offer you a lifetime guarantee on the Velcro license plate holders!
ADVANTAGES
✔ Very easy installation
✔ Extremely clean look without sharp edges
✔ T emperature resistant from -30°C to +95°C
✔ Suitable for car washes
✔ UV and weather resistant
✔ Extremely firm hold
✔ Can only be solved with a card (included)
✔ L durable
✔ Suitable for all vehicles
✔ No advertising visible
✔ Ordered today - delivered tomorrow!
Assembly Instructions
We only guarantee a rock-solid hold with our 21CARS® Velcro holders if the surface has been thoroughly cleaned and degreased beforehand.
Step 1
Clean the adhesive surface on the vehicle and the back of the license plate free of grease and silicone (with the alcohol wipes supplied or with ethyl alcohol, isopropanol, denatured alcohol, brake cleaner or thinner).
Step 2
If necessary, sand the control plates on the back with fine (approx. 600-grit) sandpaper. (this guarantees a proper hold). This is particularly necessary for new license plates.
Step 3
Before attaching the Velcro strips, be sure to rub thoroughly with a dry cloth. No streaks should remain.
Step 4
Attach 21CARS® Velcro and press firmly .
Step 5
At temperatures below 20°C, all surfaces to be glued should be warmed to lukewarm using a conventional hair dryer. (When using a hot air hair dryer, sufficient distance must be maintained, otherwise the 21CARS® holders can be destroyed!).
FAQ
Frequently asked questions about the 21CARS® frameless Velcro license plate holders.
What does a set of 21CARS® Velcro license plate holders contain?
2 x modules for the front license plate 2 x modules for the rear license plate 4 x alcohol wipes 1 x microfiber premium cleaning cloth 1 x premium carbon trimmer card
The standard set only includes the Velcro without any accessories.
Are the parts approved for road use?
Yes, the license plate holders are approved and do not require registration. However, the customer is responsible for ensuring that his license plates are correctly placed and mounted . For this purpose, the rule according to VTS (Ordinance on the technical requirements for road vehicles) must be observed. The control plates should be mounted so that they do not pose a risk of injury . This means there are no protruding edges of the signs on the bumper. Otherwise, this can be objected to by the road traffic office.
Click here for: "Ordinance on the technical requirements for road vehicles 741.41"
Click here for: "Ordinance on the technical requirements for road vehicles 741.11"
I have 2 vehicles, how many sets do I need for both cars?
One set is for one car . If you have 2 cars and use the holders for interchangeable plates, you must order the desired item from the spare parts section. Go directly to the spare parts here.
Up to how many km/h are the license plate holders tested?
The license plate holders have been tested at speeds over 300 km/h!
Do I have to be a mechanic to install the holders?
No . The conversion usually only takes a few minutes.
Can I remove the parts without leaving any residue?
Yes. The holders can be slightly warmed with a hot air hairdryer and carefully removed from the vehicle. There are no permanent marks or adhesive residue left!
21CARS® VELCRO or KLICK license plate holder? What is better for me?
Our bestsellers in comparison
Yes, with DTC
Yes
Yes
For screwing
For sticking
For sticking
Excellent
Yes
Yes
Minimally visible
No
No
Very simple, no tools required
Can only be solved with a card/flat object
Can only be solved with a card/flat object
Mini Velcro license plate holder
Is the set too expensive for you?
Then take a look at our 21CARS® Mini Velcro alternative.
