Exchangeable license plate license plate holder | Mini
Exchangeable license plate license plate holder | Mini
Exchangeable license plate license plate holder | Mini
Exchangeable license plate license plate holder | Mini
Exchangeable license plate license plate holder | Mini

Exchangeable license plate license plate holder | Mini

Normal price SFr. 49.90 Special PriceSFr. 26.80
/
VAT included. plus shipping costs

  • Schweizweit kostenloser Versand.
  • Bis 13 Uhr bestellt, morgen geliefert.
  • Lebenslange Garantie.
  • In stock
  • inventory on the way
Banner: Kauf auf Rechnung

It couldn't be simpler.

✔ 1 set = 1 vehicle (front + rear)
✔ Plug and Play
✔ Cheapest set on the market
✔ Car wash, UV and weather resistant
✔ Firm hold even after 1000 -switch

Universal Velcro license plate holder from 21Cars® offers you a aesthetic solution for all your vehicles without frame. Our self-adhesive high-performance Velcro tape can be installed in an instant . A set includes everything you need for a vehicle. Thanks to our ultra-thin Velcro, hardly anything is visible. The 21Cars® Velcro holders ensure an extremely cool, clean look and offer secure and flat fitting car numbers - without protruding edges! The product is designed for all weather conditions and can withstand speeds of over 300km/h. Whether as a nice accessory or for daily super fast change from one vehicle to another without compromises.

Quality is important to us, so we offer you a lifetime guarantee on the parts!

Benefits

✔ super simple assembly
extremely clean look without sharp edges
temperature resistant from -30°C to +95 °C
✔ Suitable for car washes
✔ UV and weather-resistant
extremely firm hold
✔ can only be released with a card (in the Included in delivery)
durable
✔ Suitable for all vehicles
✔ no advertising visible
✔ Ordered today - delivered tomorrow!

Assembly instructions

We guarantee our 21Cars® Velcro mount only if the surface has been thoroughly cleaned and degreased beforehand.

  1. Clean the adhesive surface on the vehicle and the back of the license plate free of grease and silicone (with the alcohol wipes provided or with ethyl alcohol, isopropanol, denatured alcohol, brake cleaner or thinner).
  2. If necessary, sand the license plates on the back with fine (approx. 600 grit) sandpaper. (so a proper hold is guaranteed). This is especially important for new license plates.
  3. Before attaching the Velcro strips, be sure to rub dry with a dry cloth. No streaks must remain.
  4. 21Cars® Attach Velcro and press firmly.
  5. At temperatures below 20°C all surfaces to be glued should be warmed to hand with a conventional hair dryer . (When using a hot air hair dryer, you must keep enough distance, otherwise the 21Cars® holder could be destroyed!).

Are the parts road legal?

Yes, the license plate holders are approved and do not have to be registered. However, the customer is responsible that his number plates are correctly placed and mounted. For this purpose, the rule according to the VTS (Ordinance on the Technical Requirements for Road Vehicles) must be observed. The license plates should be mounted in such a way that they represent no risk of injury. This means that the edges of the signs on the bumper do not protrude. Otherwise, this can be objected to by the road traffic office.

Here to: "Regulation on the technical requirements for road vehicles 741.41"

Here about: "Regulation on the technical requirements for Road vehicles 741.11"

What does a set contain?

2 x modules for the front license plate 2 x modules for the rear license plate

Can I remove the parts without leaving any residue?

Yes. The holders can be slightly warmed up with a hot air dryer and carefully removed from the vehicle. There are no lingering traces or sticky residue left!

I have 2 vehicles, how many sets do I need for both cars?

A set is for a car. If you have 2 cars and use the holders for interchangeable plates, you must order the desired item as well as in the spare parts. Go directly to the spare parts here.

.

We only ship to Switzerland and Lichtenstein. Please contact us using the contact form if you wish to ship outside of Switzerland.

die Post 21CARS

All orders received by 1 p.m. will be shipped on the same day

Priority: Dispatch time:1 day . In exceptional cases, the shipment may be delayed by one day. It is sent with Post Priority.
Standard: Shipping time: 2-4 days, shipped with Post Economy.

Please note that only on working days packets are delivered . The information given above refers to working days from Mon-Fri. In individual cases there may be delays. Be aware that once the package leaves our warehouse, it is the responsibility of the shipping company and not within our control.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Montageanleitung

Wir garantieren mit unseren 21Cars®Kletthalter nur dann bombenfest Halt, wenn die Fläche vorgängig gründlich gereinigt und entfettet worden ist.

1. Klebefläche am Fahrzeug und Rückseite des Kontrollschildes fett- und silikonfrei reinigen mit Alkoholtücher, Äthylalkohol, Isopropanol, Brennspiritus, Bremsenreiniger oder Verdünner). 

2.Falls notwendig die Kontrollschilder auf der Rückseite mit feinem (ca. 600er) Schleifpapier schleifen. (somit wird ein richtiger Halt garantiert). Dies ist vor allem bei neuen Kontrollschildern von Nöten.

3. Vor dem Anbringen der Klettstreifen unbedingt mit einem trocknen Tuch gut trockenreiben. Es dürfen keine Schlieren zurückbleiben.

4. 21Cars® Kletts anbringen und gut festdrücken.

5. Bei Temperaturen unter 20°C sollen alle zu beklebenden Flächen mit einem herkömmlichen Haar Föhn handwarm gewärmt werden. (Bei der Verwendung eines Heissluft Föhns muss genügend Abstand bewahrt werden, da ansonsten die 21Cars® Halter zerstört werden können!).

Meistgestellte Fragen zum Produkt

Ja, die Kennzeichenhalter sind zugelassen und nicht eintragungspflichtig. Jedoch ist der Kunde dafür verantwortlich, dass seine Nummernschilder korrekt platziert und montiert sind. Hierzu gilt es die Regel gemäss VTS (Verordnung über die technischen Anforderungen an Strassenfahrzeuge) zu beachten. Die Kontrollschilder sollten so montiert werden, dass sie keine Verletzungsgefahr darstellen. Das heisst keine überstehenden Kanten der Schilder an der Stossstange Ansonsten kann dies vom Strassenverkehrsamt beanstanden.  

Hier zu: "Verordnung über die technischen Anforderungen an Strassenfahrzeuge 741.41"

Hier zu: "Verordnung über die technischen Anforderungen an Strassenfahrzeuge 741.11"

2 x Module für das vordere Kennzeichen 2 x Module für das hintere Kennzeichen

Ja. Die Halter können mit einem Heissluft Föhn leicht angewärmt und vorsichtig vom Fahrzeug entfernt werden. Es bleiben keine bleibenden Spuren oder Klebereste übrig!

Ein Set ist für ein Auto. Haben Sie 2 Autos und nützen die Halter für Wechselschilder, müssen Sie bei den Ersatzteilen den gewünschten Artikel dazu bestellen. Oder bestellen Sie sich 2 Sets. Hier Gelangen Sie direkt zu den Ersatzteilen.

Aktion für Kurze Zeit!
lieber unsere Klick Variante?

ideal für Wechselschilder.

Customer Reviews

Based on 55 reviews
89%
(49)
11%
(6)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous

Top

A
Agron D.

Velcro replacement plate license plate license plate holder | Frameless

E
Edi K.

Everything was tip top except that I didn't get an invoice.

L
Lirim S.
Top product

I'm very satisfied , easy installation. I would recommend ea to everyone. Simply top

A
Alessandro S.
Perfect set!

I find the Velcro replacement shield set very simple and ingenious! Easy assembly, very good quality and above all very extensive with the cleaning cloths etc.! The license plate holds up well, but can also be easily removed with the supplied separation card. So far the product has kept everything it promises and the price is absolutely fine! I have no suggestions for improvement! Let's see how the product behaves in winter with ice, snow and salt...